Skip to content
Microsystems, Electronics and Acoustics
ISSN 2523-4447 · e‑ISSN 2523-4455 Open Access · CC BY-SA 4.0
Vol. 23 · Issue 5 · 2018 Oct 31, 2018 Acoustical devices and systems

Analyses of Acoustic Properties of Ventilation Ducts

AS
Andrii Mykolaiovych Saranenko Corresponding Національний технічний університет України "Київський політехнічний інститут імені Ігоря Сікорського" Ukraine
OB
Oleksii Viktorovych Bogdanov Національний технічний університет України "Київський політехнічний інститут імені Ігоря Сікорського" Ukraine
Pages63-69 PublishedOct 31, 2018
PDF (Ukrainian)
VOL 23 · ISS 5 · 2018 View issue

Abstract

Today, the interest in conducting acoustic tests in nondescript cells is increasing worldwide. Leading developers and manufacturers with the help of the latest technical solutions achieved a reduction in the cost of developing, manufacturing and assembly of acoustic cameras, increasing the life of materials compared to previous cameras. In the field of measuring acoustic parameters, there are two types of specialized international standards for calculating sound pressure levels in laboratory conditions: precise method and engineering (calculation) methods. These standards differ in approaches to testing, including the provision of loopholes for acoustic tests, and are an integral part of a series of standards that establish methods for determining the levels of sound pressure (SPL) for different types of equipment and require the provision of a free field or free field with a flat reflective medium . At the moment, there are two basic standardized requirements for the acoustic environment: the permissible error of the created free field sound (FFA) and background noise (BN), but modern design requires the use of advanced technologies. One such technology is the 3d visualization of the results of acoustic calculations. The COMSOL Multiphysics program allows you to solve a wide range of noise problems using the finite element method used in the program and acts as a world standard for the design of high-performance ventilation systems in Europe and the United States. In this paper a virtual model of the noise-absorbing ventilation duct is designed and the parameters of a sound-damaged camera are designed using the main provisions and methods of engineering calculations in the medium of COMSOL Multiphysics, as well as international and state standards. Showing the following benefits of COMSOL Multiphysics: high accuracy of calculations; reduce the complexity of the calculations; the ability to detect critical areas and develop anti-noise measures. The proposed method of high-precision designing of the effective noise abatement ventilation channel will allow to carry out measurements taking into account the provisions of international standards and enter the European market. The results of the work can be used at enterprises and in construction organizations to design sound-absorbing ventilation ducts according to world standards. Ref. 18, fig. 2., tabl. 2.

Keywords

#acoustic measurements #standards #ventilation system #finite element method #3D simulation

References

  1. V. P. Gusev, “Akusticheskiy raschet kak osnova dlya proyektirovaniya maloshumnoy sistemy ventilyatsii (konditsionirovaniya) [Acoustic calculation as a basis for designing a low-noise ventilation (air-conditioning) system],” AVOK, no. 6, 2004, URL: https://www.abok.ru/for_spec/articles.php?nid=2577 .
  2. V. P. Gusev and M. Y. Leschko, “Aeroakusticheskiye ispytaniya ventoborudovaniya [Aeroacoustic tests of ventilation equipment],” AVOK, no. 2, 2002, URL: https://www.abok.ru/for_spec/articles.php?nid=1464 .
  3. D. Kondrashov, “Zaglushay i vlastvuy: kak perestat’ bespokoit’sya i vybrat’ pravil’nuyu bezekhovuyu akusticheskuyu kameru za 10 minut [Silence and control: how to stop worrying and choose the right anechoic acoustic camera in 10 minutes],” Vektor Vysok. tekhnolohiy, no. 3 (24), pp. 38–46, 2016, URL: https://ostec-3d.ru/group-ostec/pressroom/articles/kachestvo3/zaglushay-i-vlastvuy-kak-perestat-bespokoitsya-i-vybrat-pravilnuyu-bezekhovuyu-akusticheskuyu-kameru/ .
  4. V. S. Didkovskyi, V. P. Zaiets, and N. O. Samiilenko, “Otsinka izolyatsiyi povitryanoho shumu v rozshyrenomu diapazoni chastot [Assessment of airborne noise isolation in the extended frequency range],” Electron. Commun., vol. 16, no. 1(60), pp. 164–168, 2011.
  5. S. A. Luniova, O. V. Bogdanov, and V. P. Zaets, “MetodichnI vkazIvki do rozrahunkovo-grafIchnoYi roboti ‘Akustichniy proekt primIschennya’ z kreditnogo modulya ‘ Prikladna akustika - 1’ [Guidance for calculation-graphic work ‘Acoustic room design’ with credit module ‘Applied Acoustics - 1’].” National Technical University of Ukraine “Kyiv Polytechnic Institute,” Kyiv, p. 48, 2011, URL: http://acoustic.kpi.ua/assets/files/MetodMater/RGR_PA1.pdf .
  6. R. Geike, “COMSOL Multiphysics in education-chemical reactions, heat and mass transfer,” in COMSOL conference, 2008, URL: https://www.comsol.ru/paper/comsol-multiphysics-in-education-ndash-chemical-reactions-heat-and-mass-transfer-5238 .
  7. O. C. Zienkiewicz and R. L. Taylor, Finite Element Method, 5th ed., vol. 1. UK: Butterworth-Heinemann, 2000, ISBN: 978-0750650496.
  8. O. Zienkiewicz, R. Taylor, P. Nithiarasu, "The finite element method for fluid dynamics," Amsterdam: Elsevier / Butterworth-Heinemann, 2005, 451 p.
  9. V.B. Veselovskij, A.I. Gubin, "Matematicheskoe modelirovanie lazernogo termicheskogo uprochnenija bez plavlenija poverhnosti [Mathematical modeling of laser thermal hardening without surface melting]," Metalurgіjna teplotehnіka: Zbіrnik naukovih prac' NMA Ukraїni, Dnіpropetrovs'k, Ukraine: Nova іdeologіja, 2008, pp. 47- 54.
  10. N. Y. Galushkin, N. N. YAzvinskaya, and D. N. Galushkin, Reshatel’ paketa modelirovaniya tekhnicheskikh protsessov Comsol [Solver of the Comsol process modeling package]. Shakhty, Ukraine: ISОiP (branch) of DSTU, 2013.
  11. V. P. Agapov, Metod konechnykh elementov v statike, dinamike i ustoychivosti prostranstvennykh tonkostennykh podkreplennykh konstruktsiy [The finite element method in the statics, dynamics and stability of spatial thin-walled reinforced structures]. Moscow, Russia: ASV, 2000, ISBN: 5-93093-035-X.
  12. V.I. Bol'shakov, E.A. Jacenko, G. Sossu, Osnovy metoda konechnykh elementov [Fundamentals of the finite element method]. Dnepropetrovsk, Ukraine: PGASA, 2000, ISBN: 966-7282-32-5.
  13. J. H. Ferziger and M. Perić, Computational Methods for Fluid Dynamics, 3th ed. Berlin, Heidelberg, Germany: Springer Berlin Heidelberg, 2002, ISBN: 978-3-540-42074-3.
  14. H. L. Shevchenko, “Efektyvni rezhymy roboty ta konstruktsiyi kompaktnykh reheneratoriv promyslovykh pechey [Effective operating modes and design of compact regenerators for industrial furnaces],” National Metallurgical Academy of Ukraine, 2001.
  15. S. Yankin, Akusticheskiye raschoty v COMSOL Multiphysics® [Acoustic calculations in COMSOL Multiphysics®]. 2017, p. 25, URL: http://www.acoust-conference.iapras.ru/img/COMSOL.pdf .
  16. E. S. Fedotov, “Izvlecheniye impedansa zvukopogloshchayushchey konstruktsii v sisteme COMSOL MULTIPHYSICS [Removing the impedance of a sound-absorbing structure in the COMSOL MULTIPHYSICS system],” in XVI Vserossiyskaya nauchno-tekhnicheskaya konferentsiya Aerokosmicheskaya tekhnika, vysokiye tekhnologii i innovatsii, 2015, vol. 1, pp. 380–383.
  17. A. G. Dixon and D. DiBiasio, “Integrating COMSOL into a Mathematical Modeling Course for Chemical Engineers,” in COMSOL Conference, 2008, p. 7.
  18. F.S. Kudrjavcev, L.F. Lagunov, "Metodicheskie ukazanija po raschetu i proektirovaniju akusticheskih kamer dlja izmerenija shumovyh harakteristik mashin [Methodical instructions for the calculation and design of acoustic chambers for measuring the noise characteristics of machines],"Vsesoyuz. CNII ohrany truda, Moscow, USSR: VCNIIOT, 1978, 80 p.
§ 06 — Related

Similar articles in this journal

Related peer-reviewed studies published in this journal.
View all issues

Experimental Study of the Frequency Characteristics of MEMS Microphones for Railway Noise Monitoring

Vitalii R. Prus, PhD, Assoc. Prof. Oleksii Viktorovych Bogdanov

Abstract–The paper presents the results of an experimental study of the acoustic characteristics of modular MEMS microphones INMP441 and SPH0645, aimed at their…

#acoustic monitoring #MEMS microphone #amplitude-frequency response #directivity pattern
p. 359669.1-359669.6
10.20535/2523-4455.mea.359669

Most read articles by the same author(s)

Similar Articles

1-10 of 130

You may also start an advanced similarity search for this article.