Удосконалення безпосереднього перетворювача частоти для пуску потужних синхронних електродвигунів

O. M. Sinchuk; Ihor Ihorovych Peresunko; D. A. Mikhailichenko

doi:10.20535/2523-4455.2018.23.5.132728

Vol. 23 · Issue 5 · 2018 Oct 31, 2018 Electronic Systems and Signals

Improvement a Direct Frequency Converter to Start Powerful Synchronous Motor

O. M. Sinchuk Corresponding ДВНЗ "Криворізький національний університет" Ukraine

Ihor Ihorovych Peresunko ДВНЗ "Криворізький національний університет" Ukraine

D. A. Mikhailichenko Кременчуцький національний університет імені Михайла Остроградского Ukraine

Pages38-42 PublishedOct 31, 2018

PDF (Ukrainian)

VOL 23 · ISS 5 · 2018 View issue

Abstract

Synchronous motor is usually used in a high-power electric drive, especially for mining and metallurgical enterprises, where the synchronous electric drive capacity is 40%, it consumes of electrical energy and creates production problems at the time of the start-up of powerful synchronous electric drives. There are basic directions for improving the energy efficiency of mining and metallurgical enterprises. However, as a rule, they relate to newly designed or re-equipment of enterprises and then, in the most part, the mining and metallurgical complex. In the long run, modernization of outdated equipment for all indicators, modernization of electric-powered units in order to reduce electric power consumption, modernization of power supply systems and optimization of power consumption processes with the possibility of adaptive management of these processes are the real directions for increasing the efficiency of existing enterprises. The approach and implementation of a new system for starting and driving a synchronous electric drive is proposed, known systems and methods for controlling them are analyzed, and the advantages and disadvantages of these systems are described. During the analysis, it was established that when using a direct frequency converter in the starting system of a synchronous motor, starting currents exceeding the permissible values may occur at the time of starting. A method for separately varying the value of the output voltage and the modulation frequency of a cycloinverter during a transition from a low fixed frequency to a higher one when forming electric power parameters of a synchronous motor is proposed. This method allows a transition to a higher frequency with a smaller current of the converter, which will allow us to obtain the shape of the current and voltage curves at the converter output with a smaller gamut of harmonic components. Ref. 10, fig. 2, tabl. 1.

Keywords

#synchronous electric drive #direct frequency converter #cycloinverter

References

O. M. Sinchuk, I. O. Sinchuk, T. M. Beridze, and A. M. Yalova, “Metod ocinyuvannya efekty`vnosti spozhy`vannya elektry`chnoyi energiyi zalizorudny`my` pidpry`yemstvamy`[Method of estimation of efficiency of electric energy consumption by iron ore enterprises],” Elektrotexnichni ta komp’yuterni sy`stemy`. — Odes`ky`j NPU, pp. 49–57, 2013.
K. B. Nosov and N. M. Dvorak, Sposobyi i sredstva samozapuska elektrodvigateley [Methods and means of self-starting electric motors]. Moskva, 1992, ISBN: 5-283-01162-3.
B. N. Abramovich and A. A. Kruglyiy, Vozbuzhdenie, regulirovanie i ustoychivost sinhronnyih dvigateley[Excitation, regulation and stability of synchronous motors]. Leningrad: Energoatomizdat, 1983, URL: https://books.google.com.ua/books/about/Возбуждение_регулиро.html?id=EQ9MtQEACAAJ&redir_esc=y .
Y. A. Biryukov, Proektirovanie i issledovanie sistem vozbuzhdeniya moschnyih sinhronnyih mashin [Designing and researching excitation systems for powerful synchronous machines]. Leningrad: VNII Elektromash, 1989, URL: https://search.rsl.ru/ru/record/01001520915 .
O. Sinchuk and D. Mihaylichenko, “Issledovanie puska sinhronnogo dvigatelya s shirotno-impulsnyim preobrazovatelem chastotyi[Investigation of the start-up of a synchronous motor with a pulse-width frequency converter],” TEKHNICHNA ELEKTRODYNAMIKA, vol. 4, pp. 108–110, 2014, URL: http://nbuv.gov.ua/UJRN/TED_2014_4_38 .
N. V. Bukovich, AvtorizatsIya protsesu pusku ta uvImknennya na paralelnu robotu sinhronnih mashin[Authorization to the process of launching that synchronization on the parallel robot of synchronous machines], NMK VO. Kiev, 1992.
B. G. Menshov and N. N. Haylov, “Rabota sinhronnogo elektroprivoda pri kratkovremennom glubokom snizhenii napryazheniya[Operation of a synchronous electric drive with a short-term deep voltage drop],” Elektrichestvo, vol. 11, pp. 19–20, 1984, URL: https://www.booksite.ru/elektr/1984/1984_11.pdf .
Y. M. Golodnov, Samozapusk elektrodvigateley[Self-starting electric motors], Еnergoatom. Moskva, 1985, URL: http://www.amac.md/Biblioteca/data/24/13/1/15.pdf .
I. O. Sinchuk, A. A. Chernyishev, I. I. Kiba, O. V. Pasko, O. E. Klyuchka, and O.E. Melnik, Poluprovodnikovyie preobrazovateli elektricheskoy energii v strukturah elektroprivodov. Shemotehnika i printsipyi upravleniya : uchebnoe posobie [Semiconductor converters of electrical energy in the structures of electric drives. Circuitry and management. Kremenchug, 2008.
Y. P. Goncharov, V. G. Morozov, M. V. Panasenko, V. Y. Romashko, and R. Rudenko, Volody`my`r Semenovy`ch, Peretvoryuval`na texnika. Pidruchny`k [Converting technique. Textbook]. Xarkiv, 2000, ISBN: 9660306970.