Now accepting submissions for the upcoming volume
Electronic and Acoustic Engineering
ISSN 2524-2725 · e‑ISSN 2617-0965 Open Access · CC BY-NC 4.0
Vol. 3 · Issue 3 · 2020 Aug 30, 2020 Microsystems and Physical Electronics

The Research of Piezo Phototron Effect in A2B6 Film Structures

KB
Kiril Ievhenovych Balashov Corresponding National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” kyryllb@gmail.com Ukraine
VK
Vladyslav A. Klimenko National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Ukraine
LS
Liudmyla Mykolaivna Shmyrova National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” Ukraine
SM
Serhii Vasylovych Mamykin V.E. Lashkaryov Institute of Semiconductor Physics NAS of Ukraine Ukraine
TS
Teyiana Viktorivna Semikina V.E. Lashkaryov Institute of Semiconductor Physics NAS of Ukraine Ukraine
Pages21-25 PublishedAug 30, 2020 LicenseOpen Access
EAE 3 VOL 3 · 3
VOL 3 · NO 3 · 2020 View issue

Abstract

The paper presents the results of the study of a piezo phototron effect in hetero structures based on A 2 B 6 films. The field of study of the piezo phototron effect in semiconductor thin films is new. The use of materials that have several properties at the same time, namely semiconductors, piezoelectrics and photoelectric properties, allows us to create a fundamentally new class of semiconductor devices, especially in the field of sensors and photovoltaics. Obtaining films of the A 2 B 6 group, which include CdS, CdTe, CdSe, ZnS, ZnSe, ZnO with an existing piezoelectric effect, is an urgent task. In this work, the object of study is diode structures based on them. Namely, CdS films were grown by thermal evaporation on a flexible molybdenum substrate. A thin layer of degenerate CuxS semiconductor was deposited on top of the CdS films, which allowed it to form a diode barrier structure. For the study of photodiode properties, measurements were made of the current-voltage characteristics (VAC) in the dark and light modes. Measurements were made using a power source, a voltmeter and an ammeter. The limits of voltage measurements ranged from -2 V to 2 V to prevent possible breakdown of structures. A white LED with a power output of 30mW / cm 2 was used as the light source. From the obtained CVCs it was obtained that a rectifying barrier is formed between the semiconductor films and the structure has a diode characteristic. The magnitude of the reverse current increases during illumination. Pressure was applied to the diode structures to investigate the piezoelectric effect. The pressure applied to the sample was changed by means of levers weighing 10, 20, 50, 100 and 200 grams. As a result of the measurements of the CVC during the application of pressure, it was found that the current on the forward and reverse branches of the CVC showed an increase in both the dark mode of measurement and in the light. This indicates the presence of a piezoelectric effect in this heterojunction. The calculated values of the sensitivity to pressure showed that the current on the back and forward branches of the CVC changes at different intervals. The highest sensitivity in the range 0–77.31 absolute units is observed for reverse current without illumination. With additional illumination, the sensitivity to the pressure on the back branch of the CVC decreases and is 0–7.73. All measurements made show the presence of a piezophototron effect, which allows the creation of new functional devices for measuring pressure and luminance based on this heterojunction.

Keywords

References

  1. Sagatelyan G.R. «Technologiya izgotovleniya piezoelectricheskih preobrazovateley dlya aparatov ultrazvukovoi terapii, diagnostiki i hirurgii [Piezoelectric transducer manufacturing technology for ultrasound therapy, diagnostics and surgery devices]» : Uchebnoe posobie po kursu “Technologiya priborostroeniya”. Izdatelstvo MGTU, 1993, ISВN: 5-7038-0949-5
  2. Yanych V. V. «Piezoelectricheskie vibroizmiritelnye preobrazovately (akselerometry): monographya [Piezoelectric vibration transducers (accelerometers): monography]», Rostov – Na – Donu, Izdatelstvo IUFU, 2010, ISВN: 978-5-9275-0728-З
  3. Antonio Arnau. «Piezoelectric-Transducers-and-Applications, Second Edition», Berlin Heidelberg, 2008, DOI:10.1007/978-3-540-77508-9
  4. Zhong Lin Wang. «Progress in Piezotronics and Piezo-Phototronics», Advanced Materials, vol.24, pp.4632-4646, 2012, DOI: 10.1002/adma.201104365
  5. Mechanosensation. URL: http://en.wikipedia.org/wiki/Mechanosensation
  6. Xingfu Wang, Wenbo Peng, Caofeng Pan, Zhong Lin Wang. «Piezotronics and piezo-phototronics based on a-axis nano/microwires: fundamentals and applications», Semicond. Sci. Technol., vol.32, pp.043005-043021, 2017, DOI: 10.1088/1361-6641/aa5fcd
  7. Wang Z L. «Progress in piezotronics and piezo- phototronics», Adv. Mater., vol.24, pp.4632–4678, 2012 DOI: 10.1002/adma.201104365
  8. Wang Z L. «Piezopotential gated nanowire devices: piezotronics and piezo-phototronics», Nano Today, vol.5, pp.540–592, 2010, DOI: 10.1016/j.nantod.2010.10.008
  9. Wang Z L. «From nanogenerators to piezotronics—a decade-long study of ZnO nanostructures», MRS Bull., vol.37, pp.814–841, 2012, DOI: 10.1557/mrs.2012.186
  10. Yamabi S and Imai H «Growth conditions for wurtzite zinc oxide films in aqueous solutions», J. Mater. Chem., vol.12, pp.3773–3781, 2002, DOI: 10.1039/B205384E

License

CCBY-NC 4.0
Creative Commons Attribution 4.0 International

This work is openly licensed — share and adapt freely with attribution to the authors and the journal. View license terms ↗

§ 06 — Related

Similar articles in this journal

Related peer-reviewed studies published in this journal.
View all issues

Most read articles by the same author(s)

Similar Articles

1-10 of 103

You may also start an advanced similarity search for this article.