Skip to content
KPI Science News
ISSN 2617-5509 · e‑ISSN 2663-7472 Open Access · CC BY 4.0
Vol. · Issue 5-6 · 2019 Dec 19, 2019 article

CURVE OF DESCENT OF A MATERIAL POINT IN THE SHORTEST TIME ON A TRANSCENDENTAL SURFACE IN A UNIFORM VERTICAL GRAVITATIONAL FIELD

VL
Viktor P. Legeza Corresponding Igor Sikorsky Kyiv Polytechnic Institute, Ukraine Ukraine
OA
Oleksiy V. Atamaniuk Igor Sikorsky Kyiv Polytechnic Institute, Ukraine Ukraine
PublishedDec 19, 2019
PDF (Ukrainian)
KPISN 5-6 VOL · 5-6
VOL · ISS 5-6 · 2019 View issue

Abstract

Background. The article deals with the original variational problem of the brachystochronous motion of a material point on a cycloidal surface between two given points in a vertically homogeneous gravitational field. The novelty and relevance of the work is explained by the choice of the transcendental surface, since earlier the motion of a material point was considered on algebraic surfaces of the second order. Objective. Find a curve on the transcendental surface, moving from one set point (starting point) to another set point (finish point) on this surface without friction a material point will make such a transition in a minimum time. The transcendental surface has a guide curve of the cycloid lying in one of the coordinate planes, and its generatrix are perpendicular to that plane. Methods. To achieve this goal, we used the classical methods of variational calculus (Euler–Lagrange equation), as well as the classical method of integrating ordinary differential equations in a closed form (Bernoulli method). Results. A time functional was constructed, using which the differential equations of the spatial brachystrochron, which lies on the transcendental surface, are analytically deduced. After integration in a closed form, algebraic equations of the spatial brachystrochron in parametric form are obtained. The results of the study are illustrated graphically: the projections of the trajectory of the brachystrochron on the coordinate planes OXY and OXZ . The slope angles of the optimal trajectory at the start point are determined. A comparative analysis of the time of action in the process of motion of a material point along two trajectories is carried out: along the obtained brachystrochron and along the alternative trajectory. Conclusions. The proposed approach allows to pre-plot such a logistic route of a material point on a given transcendental surface between two fixed points, which will provide a minimum travel time between them in a uniform vertical gravity field. In this case, an extreme trajectory will not necessarily be the shortest line on the surface that connects the two predetermined points (start and finish).

Keywords

#Variational problem #Brachystochronous motion #Transcendental surface #Time functional #Cycloid #Euler–Lagrange equation #Response time

References

  1. V.P. Legeza, “Cycloidal pendulum with a rolling cylinder”, Mechanics of Solids , vol. 47, no. 4, pp. 380–384, 2012. doi: 10.3103/S0025654412040024
  2. V.P. Legeza, “Brachistochrone for a rolling cylinder”, Mechanics of Solids , vol. 45, no. 1, pp. 27–33, 2010. doi: 10.3103/s002565441001005x
  3. V.P. Legeza and S.G. Savchuk, “Brachistochronous motion of the material point on an inclined plane a uniform gravitational field”, KPI Science News , no. 2, pp. 15–23, 2019. doi: 10.20535/kpi-sn.2019.2.167495
  4. V.P. Legeza and O.V. Atamaniuk, “The Brachistochronic movement of a material point in the horizontal vector field of a mobile fluid”, KPI Science News , no. 3, pp. 44–51, 2019, doi: 10.20535/kpi-sn.2019.3.175735
  5. W. Dunham, Journey Through Genius . New York: Penguin Books, 1991, 304 p.
  6. L.P. Eltsgolts, Differential Equations and Variational Calculus . Moscow, SU: Nauka, 1974, 432 p.
  7. H. Erlichson, “Johann Bernoulli’s brachistochrone solution using fermat’s principle of least time”, Eur. J. Phys. , vol. 20, no. 5, pp. 299–304, 1999. doi: 10.1088/0143-0807/20/5/301
  8. N. Ashby et al. , “Brachistochrone with Coulomb friction”, Am. J. Phys. , vol. 43, no. 10, pp. 902–906, 1975. doi: 10.1119/1.9976
  9. A.M.A. van der Heijden and J.D. Diepstraten, “On the brachistochrone with dry friction”, Int. J. Non-Linear Mechanics , vol. 10, no. 2, pp. 97–112, 1975. doi: 10.1016/0020-7462(75)90017-7
  10. S. Lipp, “Brachistochrone with Coulomb friction”, SIAM J. Control Optim. , vol. 35, no. 2, pp. 562–584, 1997. doi: 10.1137/S0363012995287957
  11. V. Covic and M. Veskovic, “Brachistochrone on a surface with Coulomb friction”, Int. J. Non-Linear Mechanics , vol. 43, no. 5, pp. 437–450, 2008. doi: 10.1016/j.ijnonlinmec.2008.02.004
  12. J.C. Hayen, “Brachistochrone with Coulomb friction”, Int. J. Non-Linear Mechanics , vol. 40, no. 8, pp. 1057–1075, 2005. doi: 10.1016/j.ijnonlinmec.2005.02.004
  13. B. Vratanar and M. Saje, “On analytical solution of the brachistochrone problem in a non-conservative field”, Int. J. NonLinear Mechanics , vol. 33, no. 3, pp. 489–505, 1998. doi: 10.1016/S0020-7462(97)00026-7
  14. H.A. Yamani and A.A. Mulhem, “A cylindrical variation on the brachistochrone problem”, Am. J. Phys. , vol. 56, no. 5, pp. 467–469, 1988. doi: 10.1119/1.15755
  15. D. Palmieri, “The brachistochrone problem, a new twist to an old problem”, Undergraduate Honors Thesis, Millersville University of PA, 1996.
  16. P.K. Aravind, “Simplified approach to brachistochrone problem”, Am. J. Phys. , vol. 49, no. 9, pp. 884–886, 1981. doi: 10.1119/1.12389
  17. H.H. Denman, “Remarks on brachistochrone-tautochrone problem”, Am. J. Phys. , vol. 53, no. 3, pp. 224–227, 1985. doi: 10.1119/1.14125
  18. G. Venezian, “Terrestrial brachistochrone”, Am. J. Phys. , vol. 34, no. 8, p. 701, 1966. doi: 10.1119/1.1973207
  19. A.S. Parnovsky, “Some generalisations of the brachistochrone problem”, Acta Physica Polonica , Suppl. A 93, pp. 5–55, 1998.
  20. G. Tee, “Isochrones and brachistochrones”, Neural, Parallel Sci. Comput. , vol. 7, pp. 311–342, 1999.
  21. H.F. Goldstein and C.M. Bender, “Relativistic brachistochrone”, J. Math. Phys. , vol. 27, no. 2, pp. 507–511, 1986.
  22. G.M. Scarpello and D. Ritelli, “Relativistic brachistochrone under electric or gravitational uniform field”, Z. Angew. Math. Mech. , vol. 86, no. 9, pp. 736–743, 2006. doi: 10.1002/zamm.200510279
  23. J. Gemmer et al ., “Generalizations of the brachistochrone problem”, Pi Mu Epsilon J. , vol. 13, no. 4, pp. 207–218, 2011.
  24. S. Mertens and S. Mingramm, “Brachistochrones with loose ends”, Eur. J. Phys. , vol. 29, pp. 1191–1199, 2008. doi: 10.1088/0143-0807/29/6/008
  25. E. Rodgers, “Brachistochrone and tautochrone curves for rolling bodies”, Am. J. Phys. , vol. 14, pp. 249–252, 1946. doi: 10.1119/1.1990827
  26. A. Obradovic et al. , “The brachistochronic motion of a vertical disk rolling on a horizontal plane without slip”, Theor. Appl. Mech. , vol. 44, no. 2, pp. 237–254, 2017. doi: 10.2298/TAM171002015O
  27. S.S. Gurram et al. , “On the brachistochrone of a fluid-filled cylinder”, J. Fluid Mech. , vol. 865, pp. 775–789, 2019. doi: 10.1017/jfm.2019.70
§ 06 — Related

Similar articles in this journal

Related peer-reviewed studies published in this journal.
View all issues

AN APPROACH TO CONSTRUCTING AN INFORMATIVE FEATURE SPACE OF TECHNICAL INDICATORS FOR FINANCIAL PROCESSES BASED ON NEURAL NETWORK MODELS

Roman Tertychnyi, Denys Chuprin, Petro Bidyuk

Background. Financial time series are characterized by nonlinearity, non-stationarity, and a high level of noise, which significantly complicates their modeling and…

#informative feature space construction approach #technical indicators #Parkinson volatility #neural networks
10.20535/kpisn.2026.3.359610

Most read articles by the same author(s)

Similar Articles

1-10 of 29

You may also start an advanced similarity search for this article.