TWO-STAGE SEGMENTATION PIPELINE FOR SATELLITE PARKING LOT PAVED AREA ESTIMATION
Background. Accurately estimating paved parking areas is vital for urban planning and environmental monitoring. However, spectral similarities between parking lot and…
Background. Chalcogenide glasses comprise a unique materials platform and are attractive in view of various applications that make use their intriguing characteristic, the ability to form surface-relief patterns. The interaction of these materials with the electron beam is of interest due to diversity of physical phenomena induced in chalcogenide films by laser irradiation. Objective. The purpose of the paper is to study direct (without selective etching) surface relief formation of optical elements periodic nanostructures on thermal vacuum evaporated film As 3 S 77 Ge 20 of ~8.3 μm thickness using electron beam lithography, as well as investigate the changes in surface nanostructures height and shape depending on exposure. Methods. The chemical composition was determined by energy dispersive analysis of X-rays. The film was irradiated by an electron beam using a scanning electron microscope. The influence of electron beam irradiation on As 3 S 77 Ge 20 amorphous chalcogenide thin film was investigated. Surface relief of the film was tapped by atomic force microscope. Results. The exposure dose G varied from 12 mC·cm - 2 to 12 C·cm - 2 . The formation of cones with Gaussian profile on the surfaces of the films was detected after local electron irradiation. Exposition dependent evolution of height surface nanostructures has been detected. It can be seen that for G < 2400 mC·cm - 2 the height of the surface relief gradually grows to 100–125 nm and for G > 2400 mC·cm - 2 , relief height decreases. The initial and inversion doses of relief formation on this film have found. For 6,6 μm pitch is equal to G 0 = 9,60 mC·cm -2 , and the inversion dose of the surface relief shape G 1 = 31.18 C·cm - 2 . At d = 10 μm, these parameters are G 0 = 6,98 mC·cm - 2 and G 1 = 36.19 C·cm - 2 . The dependences at increasing interval (16 mC·cm - 2 – 1200 mC·cm - 2 ) for d = 6.6 μm and d = 10 μm were fitted by exponential function. Conclusions. The changing of shape and parameters of the obtained surface relief on As 3 S 77 Ge 20 film can be explained by the charge model. Our investigations have demonstrated that studied As 3 S 77 Ge 20 composition is suitable for e-beam recording. These results show that As 3 S 77 Ge 20 films can be used for fabrication of the optical elements.
Background. Accurately estimating paved parking areas is vital for urban planning and environmental monitoring. However, spectral similarities between parking lot and…
Background. Resource allocation problems involving interdependent homogeneous entities arise in many practical settings, including competitive project funding…
Background. Automated surveillance systems using thermal images from UAVs struggle to detect and identify objects in real time, especially against countermeasures.…
You may also start an advanced similarity search for this article.